Hot Water Solar Systems

Over the years Cyprus homes have embraced the Hot Water Solar Systems ranking first in the world per capita (93.5%) in utilizing solar energy for heating up water for domestic use.

Additionally, 80% of the hotel apartments and 44% of the hotels are equipped with central solar water heating systems.

In recent years the Cyprus government is encouraging the upgrade of old systems by subsidizing with €175.00 the replacement of solar panels and a total of €350.00 for the replacement of the whole system. (See attached application forms)
Our company offers a free of charge service in completing and submitting your subsidy application.

Advantages of a Hot Water Solar System

Reliability

The use of solar systems in Cyprus is a tried, tested and safe technology as to its expected result.

Decentralization

Thermal energy is produced and managed at the points of demand thus avoiding huge losses through unnecessary energy transfer.

Autonomy/Economy

As solar energy is free, plentiful and infinite; costs towards production of hot water, are reduced to a minimum. A hot water system can run all year round without the need of any other input except sunshine.

Easy to Use

Installation of a solar hot water system is a fairly straightforward procedure while its maintenance is minimal.

Economy in energy

Through the use of solar systems a great volume of electricity produced through the use of fossil fuels is saved, thus reducing the damage to the environment and in overloading the grid.

Orientation of Solar Panels

To maximize the thermal performance of your system, solar panels should face the south. The actual performance is slightly reduced if the solar panels are facing the south by less than 45 degrees to the east or the west.
In case that the solar panels are facing the east or west away from the south by up to 90 degrees, the addition of an extra solar panel will remedy the loss of thermal performance.

Advantages of our copper solar systems

  1. Long life ensuring secure paying off of your investment.
  2. Robust structure, greater resistance to corrosion, higher pressure and high temperatures.
  3. Better performance, faster heating of water.
  4. No maintenance required.
  5. Compatible with current hydration and heating systems.
  6. Restrict the development or multiplication of bacteria and other harmful, to people, micro organisms.
  7. Friendly to the environment as it is 100% recyclable.

 

Hot Water Boiler

The copper lined hot water boilers are used in storing the thermal energy of water once it is produced and transferred through the solar panels. In case of lack of adequate sunshine or in need of larger volumes of hot water, there is the option of heating water by switching on the electric element located inside the boiler.

  1. Standard boiler (without the use of water pressure pump): 0.65mm inner circle lining and .90mm for both inner ends.
  2. Reinforced boiler (with the use of water pressure pump): 1.5mm-2mm inner circle lining and 2mm for both inner ends.

Available volume capacities:

  • 100 liter
  • 150 liter
  • 200 liter
  • 250 liter
  • 300 liter
  • 350 liter
  • 400 liter

Water Pressure Pumps (made in Italy)

For additional water pressure it may be required that a Water Pressure Pump is installed alongside your water supply system. In such cases the inner copper lining of the hot water boiler will be of reinforced type to withstand the additional pressure.
Our high quality Water Pressure Pumps will ensure smooth and consistent flow of water to your home.

  1. ECOPLUS 220 (for water flow from roof to the house).
    Low noise and high pressure performance to 2.5 bars. Available with 3, 4 and 5 impellers. Anti -corrosive and rust -proof materials. Motor with thermal overload protection. Double sealing system between motor and hydraulic part. High resistance to frost and icing. Supplied with power cable with plug, switch and self -sealing fitting.
  2. ECOPLUS 230 (for water flow from ground to the roof or long distances).
    Low noise and high pressure performance to 3.6 bars. Available with 3, 4 and 5 impellers. Anti -corrosive and rust -proof materials. Motor with thermal overload protection. Double sealing system between motor and hydraulic part. High resistance to frost and icing. Supplied with power cable with plug, switch and self -sealing fitting

Other models and types are available depending on requirement.

 

Metal Mounting Structures

To support your complete solar hot water system you may require one of the following types of metal structures. Special types can be made to order. We use quality galvanized steel pipes.

TYPE A

TYPE B

TYPE C

TYPE D

TYPE E

TYPE F

TYPE G

TYPE H

TYPE I